Garage Doors in Toronto, OntarioNew siding, new windows.Now the door.
After a renovation the garage door is often the last piece that still looks like the old house. We help you choose a style, colour and window layout that fits the new face of the home, measure the opening and install it cleanly.
A garage door is the largest opening in most homes, and the gaps around it add up. We fit bottom seals sized to the floor's unevenness, perimeter weatherstrip that meets the door face squarely, and threshold seals where water tends to run in. The garage stays drier, and rooms that share a wall with it stay warmer.
— Duffins Creek Door & Opener Co.
A technician who talksYou hear what we are checking and why, in real time. Ask anything; the explanation is part of the job.
Mess that leaves with usDebris, packaging and the old spring go with us. Your floor and your car look the same after as before.
Your decision, informedWe put the choices on the table with their pros and cons. Whether to repair, upgrade or replace stays with you.
Hours
HoursOpen 24/7
Nights and weekendsSame fees
In business19 years
VisitsOn-site assessment
Garage door services
Garage door services
One noisy door can wake a household. One stuck door can hold up a whole morning. Our services are organized around fixing what stops you, and around the maintenance that keeps it from happening again.
Households notice the small changes first: a new noise, a slower close, a light showing under the bottom edge. Those observations are the starting point for most of the work in this group, and they are worth acting on.
Drums are the grooved wheels at each end of the shaft that wind the cable. Worn or mismatched drums make the door climb unevenly and leave one cable slack.
Newer remotes change their signal every time they are pressed, so a captured signal cannot be replayed. If your opener still uses a remote with tiny switches on the back, an upgrade closes a gap that has been open for years.
Not every upgrade means a whole new door. New insulated sections, a high-lift track conversion for a taller vehicle, exterior hardware for a carriage-house look or a quieter drive system can each change how a garage works.
The door lands with a thud you can feel through the kitchen floor, and sometimes it bounces back up a few centimetres before settling. The bottom section has a small dent where it keeps slamming the concrete.
After years of slushy winters the cables look thinner near the bottom brackets, with rust streaks running down the door where they attach. The door still works, but the frayed wires catch your glove when you brush past.
After an overnight freeze the door stuck to the slab, the opener strained, and something gave. The bottom section is bowed inward, one hinge has torn free of its screws, and the rubber seal along the bottom no longer sits flat.
WhyWhen permit drawings or a building designer specify wind criteria, the replacement is planned from those documents rather than from appearance alone.
Traditional swing-out coach doors have the look you like, but the driveway needs to remain clear as the door opens.The usual fix
WhyThe service is as much about proportion as hardware.
Open 24/7
How a visit goes
Expect two visits. On the first, the technician makes the door safe to use or safe to leave closed, identifies the manufacturer and model, measures the section, photographs the damage and its neighbours, and checks the hinges, rollers, tracks, cables and springs for anything the impact disturbed.
1 of 3
Describe the door
Single or double, steel or wood, torsion or extension springs, and which opener. If you do not know, that is fine; we sort it out on site.
2 of 3
Assess before advising
The technician checks spring life, cable condition, roller wear and opener force before saying a word about what should be done.
3 of 3
Careful hands, clean finish
Heavy hardware is handled with stands and winding bars. When the door is running right, the tools are packed and the floor swept.
About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.
Older garages tend to have lower headroom and narrower single openings, so replacement doors and openers are chosen to fit the space rather than the other way round. Measuring the header, side room and ceiling depth is the first step on every one of these visits.
23%
Single-detached houses make up about 23% of homes in Toronto (2021 Census).
In attached housing, a resident's remote or fob may open both their own door and a shared gate, and lost devices are a real security concern. We clear old codes from the operator, program replacements, and explain to management how to keep the access list current.
My door is insulated. Does the new section need the same insulation?
It should. Insulated sections come in different thicknesses and core types, and the replacement needs to match yours so the joints line up, the hinges sit at the right depth and the weight stays consistent with the springs. Mixing an insulated section into an uninsulated door, or the reverse, generally means a step at the joint and a change in balance. The technician reads the thickness and core type from the door before ordering.
Can a wood garage door section be replaced?
Yes, though wood doors are more often site-built or made in small runs, so a matching section may be made up by a door shop rather than ordered from a catalogue. The new section is primed and finished to match, the hardware is transferred, and the technician looks closely at the neighbouring sections for rot or splitting, since wood sections tend to age together. Where several are failing, a new door is discussed.
What is a strut, and does a new section need one?
A strut is a horizontal steel stiffener fastened across the inside of a section to keep it from bowing. Wide doors, top sections where the opener arm pulls, and bottom sections that take knocks are the usual places for them. If your damaged section had a strut, the new one gets a straight strut refitted or replaced. If a top section bowed because it never had one, adding a strut is part of putting it right.
How long does a torsion spring replacement take?
Most residential replacements are completed in one visit. Securing the door, measuring, removing the old spring, fitting and winding the new one, balancing and testing the opener typically takes an hour or two, longer if bearings, cables or a bent top section are also being dealt with. The technician confirms the scope after the first checks, so you know what the visit involves before the work starts.
Can any sensor pair be used with my opener?
Not any, no. Sensors are matched to the opener's make and generation, and a board from one era may ignore sensors from another even when the wires fit. The technician reads the model from the head unit label and fits the pair listed for it. Some operators accept a documented universal pair, and those are used where the maker lists them as suitable; on a very old unit with no compatible pair, a modern operator is the way forward.
On-site assessment preferred
Request a visit
Request a diagnosis visit. Describe what you noticed.
Insulated Steel Garage Door Installation
Wind-Rated Garage Door Replacement
Carriage-House Garage Door Installation
Full-View Glass Garage Door Installation
New-Construction Garage Door Installation
Commercial Sectional Door Repair
Commercial Rolling Door Repair
High-Lift Garage Door Conversion
